New Bike, now all I need is a Plaid Shirt.

[BISavage]

Since I get so much action by the farm roads, I done choosed to install something suitable for agricultural applications: K&N Filter

 

[bartiger]

oh come on.. show us your dyno results.. please

 

[BISavage]

Even more PEER PRESSURE

 

[Vatte]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Ben Oldschool]

Did you pull your rear brake pads prior to the Dynp pull?
If not, you might do that and the front pads as well .

 

[BISavage]

Did you pull your rear brake pads prior to the Dynp pull?
If not, you might do that and the front pads as well .

Did you have pull the brakes when you dyno tuned yours?

I didnt tune mine, so it probably wasnt necessary.

 

[BISavage]

See:

 

[bartiger]

 

[BISavage]

He did use the magic word.

 

[BISavage]

Drop-In Sport-filter, with Pre-filter

 

[BISavage]

Drop-In Sport-filter, with Pre-filter

100 miles later, dust in the clean side.
So, replaced with original paper filter.

 

[bartiger]

I assume:
Green = stock
Blue= coober lid?!?
Red = DID chaine

 

[BISavage]

I assume:
Green = stock
Blue= coober lid?!?
Red = DID chaine

Now you got it-

Green: sealed chain
Blue: non sealed chain
Red: No chain at all

 

[Vitpilen]

So, I ended up with my Oil Temp gauge here:

View attachment 2955

I'm interested in this as well. Where do you connect it to, and do you have a link you can share?

 

[BISavage]

For the 701 its a bit different than the 401.

On the 401 I drilled and tapped the oil screen plug on the left side to fit the NPT sensor, then plugged the 12v to the acc switched power at the fron of the frame.

Koso is the brand.

 

[BISavage]

Had it on the Dyno again to see if the pipe is any good...

80 horsies / 75 torques



Edit: With rest the setup similar to the green line in the previous graph, streetable.

 

[Vatte]

Highly impressive and interesting result!
Can you please share the dyno graph of this run?

Thanks in advance,
Vatte

 

[talondnb]

Had it on the Dyno again to see if the new m8dpipe is any good...

80 horsies / 75 torques



Edit: With rest the setup similar to the green line in the previous graph, streetable.

What pipe?

 

[BISavage]

I have the Akro Pipe...
To be fair, the added horses probably come from the K&N filter I had installed.

Edit: Due to my bike has guarantee all parts are original from the dealer, including pipe and k&n.

 

[Vatte]

What pipe?

Typo for midpipe.

It's a Remus downpipe/midpipe.

REMUS Vorschalldämpfer KTM 690 Duke-R ab 2012, EG BE (nur mit Kat.)

REMUS Vorschalldämpfer für KTM 690 Duke und 690 Duke R aus Edelstahl hier online kaufen. Gratis Versand ab 200 €.

remus-motorrad.de