More Rubbers (please)

So, back to the topic,

5g required in front and 30g in the back... according to some manufacturers that would be inside the tolerance for no weights
 
Yeah but ya got put rubber on em & then see what ya got.
The less weight added the better.
The more perfect the balance the better.
Why, because we can. 🙂
 
Last edited:
BISavage said:
5g required in front and 30g in the back... according to some manufacturers that would be inside the tolerance for no weights
Click to expand...
Oh wow. Didn't know that tolerance.

At 5 gram I'd leave it off, and anything more than 30 gram I'm thinking of rotating the tire on the rim to get the balance better.
 
The 5 & 30 gram weights were decals on the marked heavy spots by Husqvarna on the Ft & Rr cast wheels I previously acquired.
Somebody was reading up on my previous posts…
 
Mine had ones too, will have to look and see what they said.

I measured the heavy spot of the rims and put the yellow spot on the tire there.

Then I with the tire on it came out to 5/30... I cut the 5 in half and put a half on each side of the rim.

On a quick 10 mile test run I pulled the clutch at 80mph and it was smooth as silk, so probably should he good.
 
You must log in or register to reply here.
Back
Top Bottom