Yes, great improvement over the incandescent, well worth it
Turn Signals for Svartpilen Outside of North America?? -- They look so much cleaner and not droopy lol
- Thread starter RobWCanada
- Start date
OP
RobWCanada
expert rider
I wonder why it’s not on the North American Svarts. Cost? Does anyone know why?
R
R
OP
RobWCanada
expert rider
I FINALLY got them on! Such a great, not so pricy ‘upgrade’. I love that I can see the blinker is on when riding the bike! I.E., you can see the flasher from behind! Sometimes I don’t see the green blinker on the dash.
Anyway some pics below. If you like em, and want to get them, don’t hesitate the install. They’re great. And I bought from Greenland MX, but any other would be fine too. Husqvarna Bike Parts for example.
Anyway some pics below. If you like em, and want to get them, don’t hesitate the install. They’re great. And I bought from Greenland MX, but any other would be fine too. Husqvarna Bike Parts for example.
Last edited:
OP
RobWCanada
expert rider
Also, in case anyone has issues with the install. I took some photos of the ‘mystery’ part of the install lol. The location of the ‘indicator relay’ which MUST be swapped out from the ‘bulb’ relay.
TAKE THIS COVER OFF.
THIS MODULE THAT SAYS "DC FLASHER 12V", UNCLIP THIS FROM THE MOUNT AND YOU'RE LEFT WITH THE BLUE CLIP
BLUE CLIP FITS INTO NEW LED RELAY INDICATOR MODULE
TAKE THIS COVER OFF.
THIS MODULE THAT SAYS "DC FLASHER 12V", UNCLIP THIS FROM THE MOUNT AND YOU'RE LEFT WITH THE BLUE CLIP
BLUE CLIP FITS INTO NEW LED RELAY INDICATOR MODULE
Last edited:
TheCountersteerer
contributing rider
Ok, I'm sold. Thx for the pics!
J.B.
fast rider
Do you really need a new relay? I just put those Euro blinkers on my 2020, and it's working fine without the new relay (which I still have in the box), not hyper blink or anything, just normal.
OP
RobWCanada
expert rider
I have no idea what Euro blinkers you're talking about (the Husqvarna ones -- I believe it's south Asia/Thailand and stuff).
But, yes, you must have the blinker. The Husqvarna blinker part numbers provided in this thread MUST have the relay. The Svartpilen's for North America come with 12V incandescent bulbs, and that is a different relay and part number and it doesn't work with the LED Husqvarna blinkers.
I am not just assuming this because there's two part numbers, during install, I tested this scenario with the original relay and the light output on the LED is almost imperceptible and it is ultra fast blinking.
So if yours is working, I have no idea what you have haha
J.B.
fast rider
What I meant by Euro blinkers, I meant the LED OEM blinkers that are on the Vit/Svart outside of the North American market. It's not at all fast flashing on my 2020, they are working normally without new relay - I don't understand!
OP
RobWCanada
expert rider
I have no idea bro. Haha. Did not work for me without the relay.
The relay was like $10, so not sure anyone should be taking the chance and not order it. That's all I'm saying. You probably can't order the relay from a North American dealer just like you can't order the LED lights themselves.
R
J.B.
fast rider
I bought the blinkers and the relay from KTM parts vendor in the UK.
I do understand that the LED and regular bulb current draw is vastly different, so it shouldn't work, or that was my assumption in getting the relay, too, but alas...
Ayune
fast rider
I installed these dual-color red/amber LED turn signals to get three brake lights for added safety. They’re very bright, sturdy, and cheap! I put them on the front too, just didn’t wire up the red LEDs.
oz-usa.com
I also installed the KTM 90511030000 relay as shown in post #44. No fast flash when the engine is running, but it does fast flash when the engine isn’t running… don’t fret.
Tail light only:
Brake on:
Brake off, turn signal on:
Brake on & turn signal on:
Brake on & turn signal between flashes:
Brake on, in the dark… they’re very bright:
Rear Red Amber Dual color LED Running Light Turn Signal Smoke Lens 12 Volts Motorcycle Universal Blinker
OZ has the best LED lights and light bars for your vehicle, with high output LED lights that can project miles away!
oz-usa.com
Tail light only:
Brake on:
Brake off, turn signal on:
Brake on & turn signal on:
Brake on & turn signal between flashes:
Brake on, in the dark… they’re very bright:
Last edited:
OP
RobWCanada
expert rider
I installed these dual-color red/amber LED turn signals to get three brake lights for added safety. They’re very bright, sturdy, and cheap! I put them on the front too, just didn’t wire up the red LEDs.
I also installed the KTM 90511030000 relay as shown in post #44. No fast flash when the engine is running, but it does fast flash when the engine isn’t running… don’t fret.Rear Red Amber Dual color LED Running Light Turn Signal Smoke Lens 12 Volts Motorcycle Universal Blinker
OZ has the best LED lights and light bars for your vehicle, with high output LED lights that can project miles away!
Tail light only:
View attachment 4219
Brake on:
View attachment 4223
Brake off, turn signal on:
View attachment 4220
Brake on & turn signal on:
View attachment 4221
Brake on & turn signal between flashes:
View attachment 4222
Brake on, in the dark… they’re very bright:
View attachment 4224
Pretty good. I mean I really like the LED Husqvarna/KTM blinkers (as I noted) but these are definitely an alternative. The Husky ones arn't too bad on pricing either. Yours do have the braking functionality though.
This here is interesting.
So it fast flashes even with the proper LED relay?
I wonder if @J.B. tried it with engine on and off with the Husky blinkers. His setup is puzzling
R
Ayune
fast rider
Yes, but only when the engine is off and you’re working on the bike in the garage and trying to figure out if you wasted $30 on the relay.
When I went for the test ride I was surprised and relieved to see the flash rate was back to normal. The OEM relay fast-flashes at all times with these LED indicators.J.B.
fast rider
Hiya,Pretty good. I mean I really like the LED Husqvarna/KTM blinkers (as I noted) but these are definitely an alternative. The Husky ones arn't too bad on pricing either. Yours do have the braking functionality though.
This here is interesting.
So it fast flashes even with the proper LED relay?
I wonder if @J.B. tried it with engine on and off with the Husky blinkers. His setup is puzzling
R
Yeah, I tried both with the engine on and off. I took it out on the road too, to see if actually revving it in the normal riding condition may affect, but alas, no, it's not fast flashing at all anywhere. I'm just as confused.
HTOWNGUPPY
fast rider
It’s a little older thread but wanted to see if anyone had ordered these from the United States from the website: www.bike-parts-husqvarna.com. ? I wanted to make sure this would work since the two people who used them are in Canada and not the US. And it’s $100 shipping. If anyone knows a better deal please let us know. Thanks in advance for your help!Lol, why all the way from BC? Did I buy the last Svart in Saskatchewan? haha
As for the part number. I just wanna clear that up a bit. The place you bought from https://www.bike-parts-husqvarna.com/ is a 'smart' system haha. So when you're viewing the parts fiche it knows you need 2 of 'x' and add's 2 to the cart.
With GreenlandMX, I had to increase quantity to 2. So 28114025000 x 2 and 28114026000 x 2 and the indicator relay. Does that make sense?
I finally ordered them and received them yesterday too haha...I started this topic a while ago and finally broke down and bought em. GreenlandMX was marginally cheaper due to a few 'dress up parts" (CNC anodized engine parts, foot and brake leavers, brake fluid cover, oil fill cap (honestly wasn't gonna get this -- but it's actually super nice after seeing it in person), etc...)
Once they're installed I can post the dress up parts here if anyone's interested. They're not crazy expensive so I figure why not.
Anyway, still -2ºC where I am, so may be a couple weeks before I get to this....bike is not in a heated spot
R
OP
RobWCanada
expert rider
I ordered from Greenland-MX. but I’m also in Canada
That's quite a nice "workshop" You've got there! And the new indicators are a huge improvement!
HTOWNGUPPY
fast rider
I‘m going to send both of them an email to see if they have these and if they ship to the US. Thanks for the write-up on this as well. It’s perfect for knowing exactly what‘s needed for this swap!
OP
RobWCanada
expert rider
Yup and I tell you much better looking imo and they are FAR FAR brighter. And cheaper than most aftermarket ones and they work no probs.
Dont forget the led relay…there’s one guy here who says he didn’t need it but I dunno. It’s not that expensive. The 2023/2024 model in North America still doesn’t have led?
OP
RobWCanada
expert rider
Hey, just FYI, if you haven't ordered yet, GreenlandMX actually has a deal now which can actually be applied to OEM parts (usually promo codes don't work for this).
https://www.greenlandmx.com/int/en/husqvarna_right__turn_signal/28114026000.html, there's one of the lights. Plug the other numbers in the search. Keep in mind, that when I ordered, it was challenging because if you choose rest of the world or something, GreenlandMX wont list the LED lights as available...
PROMO CODE IS: 23GMX10
I create an account in rest of the world, then sign out and add everything to cart in the url above, then login and checkout. I can't say it's the same now...maybe they've fixed it.
Anyway, they are about 5 euros cheaper than everyone and with that discount it's about 7 euros cheaper (like 30% less than other stores).
R