Vit701 Rearset

You could use something like this:
www.ebay.com

CNC 25mm Adjustable M-PRO Front Footpegs For 690 SMC 1290 Super Duke R /GT | eBay

Find many great new & used options and get the best deals for CNC 25mm Adjustable M-PRO Front Footpegs For 690 SMC 1290 Super Duke R /GT at the best online prices at eBay! Free shipping for many products!
www.ebay.com

The only proper rearsets are those northlines. But I think they look a bit cheap, esp the brake pedal.
 
Do you know how to remove the stock footpegs? I'm trying to remove the 'pin' but it feels stuck in there. Is there a locking mechanism or something else blocking it? I tried to tap from the bottom with a small rod but it didnt budge at all. I heard somewhere that there's loctite in it, but I was wondering if anyone else ran into this.
 
Max Kool said:
Remove the little C-clip first, than tap out.
Click to expand...

The first time I removed them, I didnt like how much force it was being hit with with the hammer and not even moving, so I got a big pair of channel lock pliers, taped the teeth, and squeezed it out pass the tight part. After that the hammer works just fine.

Like this (but with tape on the teeth):
20210421_095950.jpg
 
Did you have to remove the shifter to punch out the pin? It looks like there might be no enough clearance for the pin to come out.
 
I can’t recall having to remove the shifter to change the pegs (the pin goes out through the top, not the bottom). But if it looks like you need to, it’s only one bolt to remove the shifter…
 
Hi all just joined and found this. I just took delivery of my Northline rearsets. They are high quality and fit perfectly. So far its 2.75 inches higher then stock and about an inch back. I havent tested it yet on the track but it feels much more natural now in terms of aggressive positioning. They were too low for my liking for aggressive riding. At about $500 US, they are on the pricier side though :(
 
I wonder if there is a second rearset mounting on the frame?
There is a second bolthole on the side, maybe 2cm back and 1,5 cm up..
If we make an distance on the rear side of the frame it could work well..
Any guesses?
 
Location..
 

Attachments

  • PXL_20220722_141550389.MP.jpg
    PXL_20220722_141550389.MP.jpg
    231.8 KB · Views: 33
  • PXL_20220722_141329242.MP.jpg
    PXL_20220722_141329242.MP.jpg
    209.2 KB · Views: 31
Why dont you utilize the same mounting hole and make an extender plate? Extender plate bolts to the existing hole and rearset bolts to the extender plate using a TAP.
 
Extender plate.. yes, I hopped there's something like this to buy somewhere..
The two holes on the sides are some left over from Duke IV
 

Attachments

  • Screenshot_20220723-070426.jpg
    Screenshot_20220723-070426.jpg
    113.1 KB · Views: 26
On the left side there is this stupid shiftrod support, so it doesn't work out like planed 😞
Today I tried the Duke R rearset. I like more forward pegs, because it feels more easy to squat on something that's under me, rather than behind me.. and I can lock my knee better onto the tank. But Duke rearset it's just to much in front and my centerstand don't fit with them..
So I am looking for something between Vitpilen and Duke R rearset 🤷🏻
 
I wonder if the extra mount hole is for the Svartpilen? I know they have different peg locations.
 
You must log in or register to reply here.
Back
Top Bottom