St2 smart turn signal

[Satur9]

I keep forgetting to cancel turn signals. My BMW has self cancel turn signals so it's kinda ingrained . Until now. https://st2-systems.com/st2-turn-system/
It works and the install is kinda easy on the pilen because everything in in behind headlight. I ordered https://www.ebay.com/p/27019874015. connector to make it plug and play. And switched 12 volt is in headlight bucket also. I mounted mine here cause I'm lazy . And wires just make it into bucket below main wire bundle

 

[bartiger]

Nice I forget my turn signals all the time.
Didn't know that something like this exist.

 

[Alexandru.k_24]

@Satur9 How is the device working, almost 2 years later? Any feedback? I`m also considering this device, because i`m lazy too

 

[Satur9]

No problems still working fine.

 

[Alexandru.k_24]

No problems still working fine.

Thank you! I will order one for my bike. It was difficult to disassemble the lights switch to insert those little rubber/foam bumpers?

 

[Satur9]

Nope. Just two screws, maybe three

 

[Alexandru.k_24]

Nope. Just two screws, maybe three

Did you install the device on the left cooling radiator fender? How did you fixed it on the fender? Zip ties? 10x

 

[Satur9]

It's on the top opposite side of the radio radiator cap and it comes with heavy duty double stick tape

 

[Alexandru.k_24]

It's on the top opposite side of the radio radiator cap and it comes with heavy duty double stick tape

Thank you man. As the bike is new for me (bought it in December and ride it only 2 times because of the weather) and here is snownig....until sumer i want it to be fully ready for this season. So, i bought for it, the FuelX Lite device, a complete inspection OE kit (75038046110), with Motorex oil and K&N air filter, i have ordered the Akrapovič exhaust (haven`t recieved yet), an now I want this St2 smart turn signal and the bike will finally be ready