Hitting the Pipe Catalogue

[Vatte]

For me it's just for look and weight by hopefully not much sound increase and no power loss.

 

[BISavage]

And which ones are you considering?

 

[Vatte]

Based on my optical liking:
My first choice would be the SC Project S1 but it's not street legal for the Vitpilen and doesn't fit plug'n'play.
My second choice would be Arrow Works Ti. It's street legal, fits plug'n'play, but I prefer a smoother transition from the pipe to the muffler.

 

[BISavage]

Yeah, when the pipe isnt specifically made for the bike it is a chance for some performance issues (irrelevant of where its allowed on the road).

I was close to going with the Remus to start.

I saw the Remus at the dealership and the Akro, then without having heard either one I picked up the Akro purely based on looks.

 

[BISavage]

For some reason, I think this Delkevic Pipe looks pretty good on the bike;
Check it out:

HUSQVARNA VITPILEN SVARTPILEN 701 2018-2020 320mm TRI STAINLESS BSAU EXHAUST

DetailsThe attention to detail ensures fit and performance giving you a product that has proven to stand the test of time at an unbelievable price.All necessary copper and fibre gaskets are supplied with the exhaust, where applicable, completely FREE of charge, saving you £££&pound

delkevic.co.uk

 

[BISavage]

Previously I noticed that the CB 1000 R has a very similar looking exhaust from Akro as the 'pilen 701.

Looks like they make a bigger db killer for it too.

I bet that a bigger one would change the tone a notch but not the volume... maybe put the power in a slightly different range...

 

[Vatte]

The weldings on the mid pipe look not even so good.
Would be interesting to see some pictures on the Vitpilen and if the muffler is mountable by its own attached to the original cat.

I couldn't find any different pictures than that.

Through coincidence I found a picture with the Turbokit exhaust system mounted on a Svartpilen.

 

[BISavage]

Through coincidence I found a picture with the Turbokit exhaust system mounted on a Svartpilen.

View attachment 2961

 

[nampus]

Whenever I see a 701 without the heatshields/bellypan, this is all I see:

 

[bartiger]

Akra midpipe: 4.076g
But how heavy is stock?

 

[BISavage]

Akra midpipe: 4.076g
But how heavy is stock?

I dont have an answer for you, do have a question:
What pipe are you going to use for the end can?
- and when you plan on using the Vitpilen Akro, what are you gonna do with the second spring?

 

[bartiger]

Akra can and just shove it up.. the fitting is so perfect. It'll stay together.. just have to made a new can holder

 

[BISavage]

And you will leave the eyelet for the spring on the link pipe?

 

[bartiger]

Preowner gave me a cat piece for putting in at TÜV emissions control..
Before Installing I have to sort out a lot of things.. my 3d print stuff, Ecu flash on Dyno and so on.. so I plan for mid season

 

[bartiger]

And you will leave the eyelet for the spring on the link pipe?

Yes, but if you consider.. there is good exhaust welder at Pfaffenhofen, who can weld a Titan loop on your end can

 

[bartiger]

Or one could put a carbon heat shield over it.. or a protector

 

[BISavage]

Or hook the spring to the clamp

 

[BISavage]

Or hook the spring to the clamp

BOOM!

 

[Ben Oldschool]

In most of the USA, emissions checks are mostly only random and visual.

If an official notices an after-market non OEM exhaust end-pipe (& they heard excessive Loudness), then a citation could take place.

Engine modifications on my bike make use of the OEM end-pipe/muffler.

 

[BISavage]

If an official notices an after-market non OEM exhaust

Dude, what about those thick Yoshi Pipes?

"...your right Officer, they dont look Stock... that is exactly why I bought this Special Edition bike which came from the factory like that...)