Help me remove the silencer from my Akrapovic exhaust :)

[Kema1903]

Hello!
I've been scouting the internet for help, yet, no luck. So here I am on the forums as my last resort.
I bought my Husqvarna Svartpilen 125 a week ago with an Akrapovic slip on exhaust. I can't find an another one like it anywhere.
It has a pre-drilled hole with the rubber cap on it. When removed it shows the "screw" that should be removed to get the silencer out.
How on earth am i supposed to get it out?
Help would be much appreciated.
I will attach pictures of the "screw".

 

[Jester1971]

I believe others have used a dremel to remove any blobs of weld that are in the way or holding the bolt to the exhaust, then just undo the bolt with a socket!! Sometimes the bolt will come out on the socket if you are lucky but it may fall into the end of the exhaust. You will then have to retrieve it with a magnet or remove the end can and shake it out. Once the bolt is undone the baffle just pulls out.
I want to add I have no experience with Akrapovic exhausts but I have looked at several videos online, you are lucky that yours has the hole for removal already (plugged with rubber grommet) as most mean you have to drill a hole in the end an.
If you use the search function on this site, type Akrapovic Db killer removal there is one HQV member who has done this to his slip on.
Good luck…..