Engine rattling

nadda96

new rider
Joined
Mar 25, 2022
Messages
2
Location
Sacramento
Hello,


I just did an oil change at 4,500 miles on my 22' vitpilen, used the factory filters and motul 7100 4T 15W-50 synthetic oil, and torqued everything to factory specs. I fully drained all the old oil and no excessive metal flakes in the old oil. I filled it up with 1.7L, let the bike warm up idling and when it got to operating temp I check the oil level and the oil level was exactly where it should be in the view hole. I rode it for 10 minutes then jumped on the freeway. After that the low oil pressure light came on and the bike started dying. I got over to the shoulder and the bike wasn't leaking any oil. It was rattling very loudly though, I think from the head but haven't checked it much as it just happened. I picked it off the road later and it could barely go up the U-Haul trailer ramp. What in the world might have happened? I went and replaced all three filters. I've been wrenching on motors for a long time so l made sure to follow each step for this bike. I'm just at a lost of what might have happened. My warranty expired 2 months ago.
I'll have to start tearing into it but anyone
have any prelim guesses? (The gauge picture shows the temp super high, I didn't touch any of the cooling system. I think it's possible I turned the key on and caught the animation of it going up then down or the oil pump went out so the oil wasn't cooling what it should be)
Bad noise <— here is a link to the noise it makes
 

Attachments

  • IMG_6435.jpeg
    IMG_6435.jpeg
    385.2 KB · Views: 21
  • IMG_6441.jpeg
    IMG_6441.jpeg
    488.2 KB · Views: 22
  • IMG_6433.jpeg
    IMG_6433.jpeg
    513.1 KB · Views: 24
  • IMG_6467.jpeg
    IMG_6467.jpeg
    195.9 KB · Views: 23
Last edited:
That's a bummer. I can't imagine how you could have caused an issue like that with just on oil and filter change. Did the new screens look just like the old ones? My only thought is that possibly a wrong part could disrupt the oil flow. However, I am certainly not an expert at this. I do have a vested interest since I am about to do my 4500 mile service on my 23' Svart. The dealer charged me $500 for my 600 mile service, so I'm definitely doing it myself going forward. I think that included a valve adjustment though, which is probably the only thing I'm not going to do myself.
 
Any update on this nadda?

Any update on this nadda?
Update: Got a call from the dealership a couple of days ago and they said the oil pump gear failed and destroyed the crank and crank cases. 😭 (I can’t imagine why with only 4,500 miles)
On the positive side the dealership submitted it to Husky and they decided to cover it (thank god).
 

Attachments

  • image_2.jpeg
    image_2.jpeg
    221.5 KB · Views: 17
  • image_3.jpeg
    image_3.jpeg
    199.9 KB · Views: 14
  • image_4.jpeg
    image_4.jpeg
    137.6 KB · Views: 14
  • image_3.jpeg
    image_3.jpeg
    205.8 KB · Views: 13
  • image_2.jpeg
    image_2.jpeg
    144.5 KB · Views: 12
  • image_1.jpeg
    image_1.jpeg
    136.8 KB · Views: 12
  • image_1.jpeg
    image_1.jpeg
    130.7 KB · Views: 16
Sucks that it happened but great that Husky (KTM) is covering it.
 
I guess anything can fail at anytime but i'm glad that it worked out for you.
I was thinking of doing the first service myself and saving money (plus i don't trust other ppl working on my bike) but reading your agro i decided to let the dealership do it and hence retain my 2yr warranty.
 
I guess anything can fail at anytime but i'm glad that it worked out for you.
I was thinking of doing the first service myself and saving money (plus i don't trust other ppl working on my bike) but reading your agro i decided to let the dealership do it and hence retain my 2yr warranty.
Doing your own service voids your warranty in Australia?
 
irsh....to my knowledge it only voids it on the FIRST service. That 1000km service needs to be done by an authorized dealer, probably as a safeguard to it's run-in. All further services u can do yourself (or any dealer)
 
irsh....to my knowledge it only voids it on the FIRST service. That 1000km service needs to be done by an authorized dealer, probably as a safeguard to it's run-in. All further services u can do yourself (or any dealer)
Interesting. If it's mandatory there I'd certainly do it to keep the warranty in effect.
 
Interesting. If it's mandatory there I'd certainly do it to keep the warranty in effect.
The upside of having the dealer do the first service is that as a bonus he installed an Iridium plug....and we all know how easy it is to change a plug on a 401. :mad:
 
Back
Top Bottom