Crash bars for the 801

B

blue_monkey

expert rider
Joined
May 31, 2025
Messages
107
Location
Bristol
Just wondering if anyone had figured out which crash bars from the Duke 790/890 might also fit the husky? Any recommendations?
 
Hello Guys. A few pics of Evotech crash protection installed on my bike. If it helps someone 😉
 

Attachments

  • IMG_6846.jpeg
    IMG_6846.jpeg
    1.1 MB · Views: 56
  • IMG_6830.jpeg
    IMG_6830.jpeg
    869.2 KB · Views: 55
  • IMG_6829.jpeg
    IMG_6829.jpeg
    973 KB · Views: 57
  • IMG_6827.jpeg
    IMG_6827.jpeg
    519.9 KB · Views: 57
  • IMG_6828.jpeg
    IMG_6828.jpeg
    628.8 KB · Views: 56
  • IMG_6826.jpeg
    IMG_6826.jpeg
    515.2 KB · Views: 57
  • IMG_6825.jpeg
    IMG_6825.jpeg
    590.1 KB · Views: 52
  • IMG_6824.jpeg
    IMG_6824.jpeg
    555.9 KB · Views: 52
Thank you, I installed HQ front and rear axle protection and I'm on the fence with the engine protection. Thanks for the pictures.
 
Perfect! I was afraid of that to be disturbing but it’s not. Almost invisible. And imho it saves the radiator if the bike falls.

But it never falls after you add crash protection 😉😉😉
 
  • Like
Reactions: CRK
Just saw your front forks, aren't they awfully close to bottoming out? On the phone in the sun so a bit hard to see.
 
CRK said:
Just saw your front forks, aren't they awfully close to bottoming out? On the phone in the sun so a bit hard to see.
Click to expand...
Do you mean that red ring on the leg of the fork? I tested emergency braking and abs 😉
 
zeno said:
Thanks! Helps a bench. Doesn't look too bad at all.

If it would fall over.. would it be enough to protect the tail from touching the ground you think?
Click to expand...
Happy to hear that!

Well, that's the question :-) I did not try it :-) However, I conducted serious scientific research using a piece of a wooden board... Imho, it won't touch the ground because of the passenger footrests. But even without them it won't I guess.
 

Attachments

  • IMG_7125.jpeg
    IMG_7125.jpeg
    381.5 KB · Views: 32
  • IMG_7127.jpeg
    IMG_7127.jpeg
    553.7 KB · Views: 30
  • IMG_7128.jpeg
    IMG_7128.jpeg
    492 KB · Views: 31
  • IMG_7129.jpeg
    IMG_7129.jpeg
    472.7 KB · Views: 26
  • IMG_7130.jpeg
    IMG_7130.jpeg
    396.4 KB · Views: 28
  • IMG_7131.jpeg
    IMG_7131.jpeg
    441.4 KB · Views: 28
tndr said:
Happy to hear that!

Well, that's the question :-) I did not try it :-) However, I conducted serious scientific research using a piece of a wooden board... Imho, it won't touch the ground because of the passenger footrests. But even without them it won't I guess.
Click to expand...
Thanks for that pristine scientific deep dive you did ! :)

That really does reassure.
thinking of removing the foot rests, could work could work 🤔
 
tndr said:
Happy to hear that!

Well, that's the question :-) I did not try it :-) However, I conducted serious scientific research using a piece of a wooden board... Imho, it won't touch the ground because of the passenger footrests. But even without them it won't I guess.
Click to expand...
Haha, dont make me bolt on the passenger pegs again!
 
tndr said:
Don't do it! :-) Science might be wrong!

I am about to remove them as well. Just have to justify the price of the silencer holder
:)
Click to expand...

Silencer holder has really been nicely made and machined , not just a simple piece of straight metal with some holes. You'll love it haha 😄
 
tndr said:
Don't do it! :-) Science might be wrong!

I am about to remove them as well. Just have to justify the price of the silencer holder
:)
Click to expand...
All too expensive but if you don't want to carry extra weight and (maybe?) protection with the passenger pegs its either that or making your own.

I decided to go the easy route and buy it (and cry later) since I don't have access to a proper shop.
 
You're right :-) It's my first bike, so I had to buy pretty much everything, which moved the silencer bracket low on the priority list, and I need some justification why I still don't have it
:)

But at least, what's positive. It's all cheaper than road cycling and mountain biking :-)
 
Btw, I need a rear stand. Did some research and found that the strength lies in simplicity in this case. I am looking at the simple Valtermoto fork rear stand. Do you have any experience with this? Which stands are you using?

Valter Moto | shop

www.valtermoto.com www.valtermoto.com
 

Attachments

  • CAVS0119_00.jpg
    CAVS0119_00.jpg
    61.9 KB · Views: 1
Last edited:
You must log in or register to reply here.
Back
Top Bottom