Bypass sidestand sensor
- Thread starter ggiiooo
- Start date
Jakedasnake
contributing rider
Bypassing requires buying a dongle from china, you can't just unplug the part. Did your magnet AND sensor break? If its just the magnet, you could just replace it pretty easily. You could also do a ghetto bypass by welding a magnet to the sensor. I got home once by ducttaping the magnet back onto the sensor after a garbage truck bent my kickstand out of place.
toast449
top rider
If you unplug it and just put in a jumper wire you should be fine.
nardustyle
contributing rider
Jakedasnake
contributing rider
Nice, seems like this stuff has gotten more accessible since I last looked a few years back. Whats the fap filter removal sensor do?
Jakedasnake
contributing rider
Nvm, think you meant the evap removal kit
nardustyle
contributing rider
My apologies! the evap yes, but basically the sensor removes the plastic piece on the left side beneath you, along with all the air channels used for communication with the ECU.
This modification creates more space and reduces the bike's weight by approximately 350 grams. Additionally, I found it helpful for changing the exhaust route to the older 2019 version.
You can also save about 100 grams by removing the cable and magnet from the side stand.
This modification creates more space and reduces the bike's weight by approximately 350 grams. Additionally, I found it helpful for changing the exhaust route to the older 2019 version.
You can also save about 100 grams by removing the cable and magnet from the side stand.