Brake Pads

BISavage

champion rider
Joined
Oct 8, 2020
Messages
2,497
Location
Unspoken Origins
Simple question, sinter or ceramic?

I know there are benefits to both, but what are they?

Maybe there is an expert out there with some insight?
 
I always thought: Semi-sintered = road use.
Sintered = fast road use.
Ceramic = more track focused.
I might be wrong though.
 
So after a little ride with the sintered front pads this is what I noticed;
Application seems more doseable.
The ABS is not a surprise, with its intervention being much more predictable, and more easily induced without exaggerated lever pull.
Stopping distance is maybe 5-10 ft better from a hundred to 0.
As noted by Vanessa, they feel more oriented towards spirited riding, and I would guess they dont wear as long as the stock Brembo pads.

For the rear I may go with ceramic.
Fluid will wait a bit until I do some more research.
 
Last edited:
Sintered pads up front and organic in the rear. They provide more bite up from and more modulation in the rear. That is preferred setup to those who know about brake feel.
 
And the stock setup is exactly that, right?

The front is sintered brembo hh, not sure about the rear pad material though.
 
Back
Top Bottom