Advice following decat installation

max_mgt88

new rider
Joined
Jan 11, 2023
Messages
2
Location
France
Hello

Excuse me for the google translate.

I introduce myself max from France.

I have a brand new 701 svartpilen from 2022 (but eu4 from 2020) which I equip step by step.

I installed a decat with the stock muffler (because the noise with the catalyst was just sickening).

I have browsed the 11 pages of the forum, but what do you advise me now to improve the motorcycle to the decat? I am a little lost...

I am not looking for a racing machine but good engine behavior.

what do you recommend ?

A rottweiler fuel EU4 dongle?

An EU5 o2 optimizer (which works with eu4 and o2 sensor)?

An o2 sensor controller?

Is it advisable to remove the air addition system?

Finally is it advisable to remove the cover of the air box and even I could read to raise it with wedges?

Thank you for your feedback, I will quickly post photos of the bike once finished.
 
Last edited:
EU4 dongle is good.
Not heard of anyone using an EU5 dongle on Vit/Svart.
O2 sensor controller seems to be a step up from a dongle, those who have them like them.
Dynojet PCV or a ECU reflash would be best option.

As for the airbox lid removal, do it. Seems to work with all the above with no downsides.
 
The Rottweiler dongle helps smooth the bike out at low rpm even if you don’t do any mods so I would recommend.

You really only need the tune from what I have seen when you remove air flow restrictions on the intake and exhaust side, so if you removed the cat but left the lid on the intake is still restricted so the engine doesn’t “pump air” better or with more volume. In my opinion if your removed the cat and took the lid off you’re now increasing the flow of the engine and may need a tune.. it’s all dependent on how restrictive the stock muffler is.
 
Hello

Excuse me for the google translate.

I introduce myself max from France.

I have a brand new 701 svartpilen from 2022 (but eu4 from 2020) which I equip step by step.

I installed a decat with the stock muffler (because the noise with the catalyst was just sickening).

I have browsed the 11 pages of the forum, but what do you advise me now to improve the motorcycle to the decat? I am a little lost...

I am not looking for a racing machine but good engine behavior.

what do you recommend ?

A rottweiler fuel EU4 dongle?

An EU5 o2 optimizer (which works with eu4 and o2 sensor)?

An o2 sensor controller?

Is it advisable to remove the air addition system?

Finally is it advisable to remove the cover of the air box and even I could read to raise it with wedges?

Thank you for your feedback, I will quickly post photos of the bike once finished.
How s the sound with decat and ori muffler? Not too loud but still good?
 
Comment est le son avec le silencieux decat et ori ? Pas trop fort mais toujours bon ?
Hey SamV

Excuse me for my late reply

Yes the sound is very good for a low cost.

The sound is like a good old "mono" 600 xt, very nice!

For my initial question I finally mounted the 02 optimizer and the bike turns perfectly!
svart.jpg
 

Attachments

  • svart 2.jpg
    svart 2.jpg
    479.3 KB · Views: 8
Back
Top Bottom