Pretty easy to install...i cut the earth wire and put a connector in just in case i wanted to connect something else to earth and didn't want more connections straight to battery.
Let us know your thought.
www.youtube.com/watch?v=VTHfvQjuRfc
Just interested to see what other ppl use as their go to torque wrench/wrenches and what they think of them.
I'm using a German 1/4 '' Wera for the lower values and an Australian 3/8'' Sidchrome dual beam for the higher values (mainly for a car but occasionally for a bike)
Both are consistently...
I had a helmet stolen off a previous bike (cut strap) so I try to minimize the risk with these helmets. The marine grade stainless steel chains either connect through the chin of the Shoei or the open face of the HJC to the Kijima , or the open face directly to the Kijima, OR either helmet to...
East to install and great quality. More expensive than their Chinese counterparts but how much is your helmet worth.
https://www.amazon.com.au/dp/B09FNW3S53?ref=ppx_yo2ov_dt_b_fed_asin_title
Made from am old plastic cup, a piece of plastic mike container, a nylon tie and 3 pop rivets. An advantage i find with this design is that u can move the cup up and down to adjust to the fit required.
Cost $0 and works great.
I'm only familiar with the Vitpilen and that's a great price.
Makes u wonder how much profit dealers make, and how much profit is made from cost price at factory level up the chain till it eventually gets to the downtrodden end consumer.....Capitalism at it's best; or worst.
Look both up on a Husky Parts List....if their the same part number then their the same part.
Example:
https://www.perthhusqvarna.com.au/partFinder/fiche/husqvarna/2022/vitpilen-401#next
https://www.perthhusqvarna.com.au/partFinder/fiche/husqvarna/2022/vitpilen-401/shifting-mechanism#next
Bought this when it was on special.
Mainly cos when i want to keep my Vit is on it's paddock stand i can use this on another bike, instead of getting a second paddock stand.
https://www.aliexpress.com/item/1005006393113966.html?spm=a2g0o.order_list.order_list_main.5.63f61802kthWcn
I installed a Kelpi muffler on my Vit 401 and am quite chuffed with it. Adios sewing machine and a noticeable boost in performance.
I chose the Flanker; ran it with no baffle. You can get a better idea by viewing / listening to the utube videos of their range...
The upside of having the dealer do the first service is that as a bonus he installed an Iridium plug....and we all know how easy it is to change a plug on a 401. :mad:
My engine is idling at 2000rpm and that seems a tad high....i want to drop it back to around 1500rpm.
I don't know specifics but was told that altering the parameters in the ECU would drop it back.
Any experience ppl.......Humbug ?
PS. found out engine idle is set and can't be adjusted......the...
Not a big fan of Aluminium bobbins cos they tend to get chewed by the paddock stand so i ordered these made from Stainless Steel. The best price was direct from the manufacturer...
irsh....to my knowledge it only voids it on the FIRST service. That 1000km service needs to be done by an authorized dealer, probably as a safeguard to it's run-in. All further services u can do yourself (or any dealer)
I guess anything can fail at anytime but i'm glad that it worked out for you.
I was thinking of doing the first service myself and saving money (plus i don't trust other ppl working on my bike) but reading your agro i decided to let the dealership do it and hence retain my 2yr warranty.
The owners manual says 5-7mm with the rear wheel off the ground but this seems far to tight . If u put the bike on the ground the tension varies very little (5-7mm) and i always worked to the safe rule of thumb 20-30mm with the bike on the ground. I know there are suspension settings/riders...
I bought the grinder (skin only) for AU$150....the 6ah battery cost AU$155.
I figured it would be good for quick / small to moderate jobs and invaluable in tight spaces.
The battery cost more than the actual tool. :confused:
Thanks BISavage.