Search results

  1. L

    2021 Vitpilen 401 Head Gasket Woes

    Yes. I should have watched the video before committing. I think I will start a thread about forum members miles traveled and reliability.
  2. L

    2021 Vitpilen 401 Head Gasket Woes

    Just more confirmation of my suspicions that the bike is not up to Japanese quality/longevity/reliability standards. It does not help that it is highly stressed to get max power out of a small displacement one lunger. I knew that going in but bought it anyway because it is athletic...
  3. L

    Modest restyle

    Yes, from what I hear, the best quality and a bit bigger too. In most states, like here, 2 are required, so pricey. I saw someplace, I forget where, decent quality knockoffs are available for a lot less. Anybody know about those?
  4. L

    Modest restyle

    Tight at the swivels. They loosen at the bars when bumped anti-clockwise, but can usually be re tightened by pulling them clockwise by hand. It does not seem to matter how tight you torque the attachment screws.
  5. L

    Can anyone tell me if the Vitpilen 701 uses the same size Triple-Tree as the Vitpilen 401?

    Sorry, I spoke too soon, I confused trial with offset. With different offsets (distance of the steering axis behind the fork tubes) they would not be interchangeable. different trails , I do not know. "The trail of a motorcycle is defined as the distance measured form the center of the front...
  6. L

    Can anyone tell me if the Vitpilen 701 uses the same size Triple-Tree as the Vitpilen 401?

    Don't see how. According to Cycleworld, 401 has 3.7 inch trail 701 has 4.3
  7. L

    Modest restyle

    Fenrir. They came with the used bike, along with the stock mirrors and another set for the stock location. These gave the best view back, but a little too small and hard to keep tight.
  8. L

    Modest restyle

    Most recently, cleaning up the bars. I had intended to just grind off the cross bar mounts and touch up the bare spot, but as the bars were textured, matching up the bare spots was not possible. As long as I was having to repaint the entire bar why go back with boring black? Used...
  9. L

    2016 Cycle World, 401s Have Arrived

    In 2020 the bikes were completely retuned and exhausts modified to meet Euro 5 standards for less noise and fewer emissions. These were major factors in the need for a second gen. Likely this required compromises less than optimal from a performance standpoint. That would seem to me to make...
  10. L

    Tank tag removal on 401

    Had occasion to take the side panels off today and it appears the tags are held on by plastic pins through holes and then expanded on the inside. Kind of like a plastic rivet. Nothing you would want to pry off. Grinding off pins with a Dremel from the inside is the best bet for removal if you...
  11. L

    2016 Cycle World, 401s Have Arrived

    I think they changed the tuning in 2020, Euro 4/5. Exhaust changes, among others. They still rate them the same, but once again that is peak horsepower and says nothing about changes farther down the curve. Maybe they lost it then. I think I should have found a first gen Svart with nicer...
  12. L

    What's the purpose of the exhaust chamber?

    Makes me wonder why Husky would have put the chamber on in the first place. It's heavy, ugly and cannot be that cheap to make; bet one ordered from the factory would cost a small fortune. Looks like they could have just enlarged the muffler a little to meet noise regs.
  13. L

    What's the purpose of the exhaust chamber?

    To be honest, could not tell much difference. A little louder would fine. I think I might get one. Thanks.
  14. L

    2016 Cycle World, 401s Have Arrived

    No. Look at the curves directly above 7600 rpm which is more relevant than peaks near reline, as that is the meat of the common hard acceleration range. 35 for the KTM, 28 for the Svart, a whopping 20% difference. The Duke makes 4 to 7 hp more all the way between 6500 to 9000 rpm, The...
  15. L

    Quality concerns

    I was able to rectify one the quality issues that bugged me the most; the warped left side panel. Heated with a heat gun while praying not to damage the paint and then applying a bit of hand/finger pressure in the right direction.
  16. L

    2016 Cycle World, 401s Have Arrived

    Cool. Thanks for the link. But I would like to see what a 300r weighs on their scales. Buy the way, that's a Swart, a couple of kilos heavier that the Vit. The dino. results are disturbing. The Svart made 7 less hp compared to the Duke at 7600 rpm where it counts most though they...
  17. L

    2016 Cycle World, 401s Have Arrived

    Sometimes it is difficult to make direct weight comparisons between bikes, due to different methodologies used by the source. I try to go to the same source for different bikes thinking they would use the same methodology, but that is just an assumption. The Cycleworld test you site shows...
  18. L

    No more neon yellow

    Fork seals? Sorry, I do not follow. What indicates that? The reflectors come with an adhesive strip on the back side. I did not apply it directly to the radiator ends as I thought that may cook the adhesive. Rather I cut some .040 aluminum backers that fit tightly into the end caps, stuck...
Back
Top Bottom