Search results

@bob @BeO @Satur9 @kevxtx What's the difference between O2 Sensor controller dongle and fuel mod? I see that one is using the signal from the O2 sensor and the other is using the signal from IAT sensor. Can we use both of them in parralel? Will there be a benefit using both of them? I see a lot...

Wow, this sucks! I wonder what happened there? Is it a common problem and should we all expect this? Or is this an isolated case? If somehow you find out what happened there, maybe you can keep us updated! Good luck!

@Harold J. The FactoryPro already came with a replacement spring. But it seems to be exactly the same as the original one. Anyway...I don't see how the stronger spring would improve the quickshifter functionality. Maybe a stronger spring would "lock" the gear better because of the force applied...

@Vatte I thought so, but I thought I'd ask, just to be sure. Then...I'll make a quick visit to the dealer, maybe I can get the downshifts to go as smooth as upshifts after a recalibration.

OK guys, finally, the needed part (magnet holder), has arrived. I have replaced it, and everything seems fine. Quick shifter works again🥳! After replacing the shifter lever and spring with the Factory PRO one, upshifts (using quick-shifter) are absolutely perfect. Not so perfect with the...

@Actionabe Dude, how did you shorten the stock exhaust? 😁 I was looking for something like this, after seeing the Yellow Arrow project. I really don`t like any of the exhaust that can be found for this bike. Some instructions about how to shorten the stock exhaust would be appreiated.

I did this in Romania, but only after I showed them that the bike is registered as non 35kw version. If you want to have a more powerful bike, you need to pay taxes and insurance according to the power of the bike. It's illegal to ride a non 35kw bike, registered as 35kw, no matter what driving...

I think it is the same type of sensor (Hall effect sensor). So I may have installed the magnet in the wrong position. Since the magnet is rectangular, there are at least 4 positions that can be mounted. So I just ordered a new sensor because I don't want to make 3 more attempts. Usually the last...

I have not had problems, so often, with false neutrals. In driver's school, I had a bike that was hard to get into gear. That's how I got used to press hard on the shifter 😂 so...no false neutrals here.

@Vatte Regarding the position sensor, I didn`t simply removed it from the shifter arm. I removed the plastic cover from it, and took the magnet out to clean it. The magnet is a rectangular shape, so it can be mounted back in several positions. So, my theory is that maybe I didn`t instaled it in...

@Satur9 Strange that recalibration is needed, after this work, because absolutely every removed and reinstalled part has a fixed position. What I'm thinking, is that in the little black plastic box on the shifter shaft is a magnet that I removed to clean the dust from the clutch discs. That...

Hello guys, Today I did some work to my motorcycle, and now, the quick shifter doesn't work normally. I have replaced the shift star and the shift arm, with a factory pro one. I have also replaced the oil during this job(Motul 300V² 10W50). The problem now, is that sometimes, I can not shift to...

I think that the only way is to replace the slave cylinder with an adjustable one. As far as I know, Rekluse is making one for the 701 Supermoto. But, since is the same as the one on Svartpilen/Vitpilen 701, should work just fine.

Is it possible to replace the shift star, without removing the clutch basket? Is there enough room to take out the bolt and the shift star itself? Thank you!

Hello guys, Can someone, please, explain to me what`s the deal with the 35KW version of the Svartpilen 701? The dealer wich I bought the motorcycle from, said that the one that i`m buying, is limited to 35KW and 150KM/H. So what`s the deal with the power limitation. As far as speed limit, the...

@Harold J. Right after i have written that post, i went to my bike and measured the handlebar. As you said, the handlebar is a bit thicker on the clamp than on the ends. So, there should be no problem fitting the 401 svart controls on the 701. Thank you mate!

@Harold J. I didn't actually measure the handle bars, but according to parts catalog, those are the dimensions. I will measure my handle bar to see what diameter it has. See the two photos attached.

@LuisLAN I was looking online to buy the 401 Svartpilen left handlebar controls, but than i noticed that the 401 Svartpilen handlebar is 26mm in diameter and our 701 Svartpilen handlebar is 28mm. Do they fit properly on our handlebar? Is there any gap left? Can you take a picture of the...

@NToxx Are CL Brakes, better than Brembo? Thank you! The stock ones are good enough for city braking, but for higher speeds like above 100km/h, not that great.

This one? Are they better than the original?