Search results

  1. nampus

    full/empty tank sensor and fuel consumption

    They all work like this. Just reset your trip meter when refuelling. After the light comes on you have at least 2 probably 3 litres left.
  2. nampus

    Dutch Vitpilen 701

    That seems quite high to me, especially for a light bike like the Vitpilen
  3. nampus

    Dutch Vitpilen 701

    I've had S22's before, they are my favourite tyre so far. Love how they feel! I've got them on my Triumph as well. I run them at 2,4 front and 2,5 rear.
  4. nampus

    Dutch Vitpilen 701

    After my day trip to the Ardennes Wednesday the Husky is now at 40.739km which means it's time for a valve clearance check (and some other stuff) So opened her up: All four valves still within spec, so no need for adjustment 🥳 Closed up again: Then it was time for some fresh rubber: Rear...
  5. nampus

    Ride Pictures!

    A day in the Belgian Ardennes today:
  6. nampus

    801 owners club

    This is what akrapovic uses for holes in carbon end caps 😅
  7. nampus

    801 owners club

    Akrapovic P-GUV004 is the part you are looking for...
  8. nampus

    Dutch Vitpilen 701

    Fitted a set of R&G tank grips this morning. I've bought a set of one piece leathers over winter, and found they are a bit slippery on the inside of the thighs. Also ordered a set for the Triumph, but they haven't turned up yet.
  9. nampus

    Svartpilen 701 Master Cylinder Upgrade

    Not 100% sure on the Svart, but on the Vit it is just behind the head stock underneath the tank. So you'll probably will need to remove the tank if you want to replace the lines. You can get adapters from Hel to convert from axial to radial mc...
  10. nampus

    Svartpilen 701 Master Cylinder Upgrade

    They are known to fail. I've had to rebuild mine, and mine keeps letting a tiny little bit of air into the system over time. So I have to bleed mine every few months.
  11. nampus

    Svartpilen 701 Master Cylinder Upgrade

    I've no issues yet with my Brembo brake master cylinder (38.000km) The magura clutch is rubbish. Mine will probably be replaced with a Hel master in the future. Your Svartpilen came from the factory with braided lines, so replacing them isn't necessary.
  12. nampus

    Dutch Vitpilen 701

    If there is any increased performance from that akra it will be 1 or 2 hp at most, and you need to be pretty special to be able to notice 1 or 2 hp 😅 Haven't ridden the bike since replacing the chain and sprockets. But I'm sure it'll be fine. I've done over 20k km with 16-42 and this will be...
  13. nampus

    Dutch Vitpilen 701

    I've done about 30 minutes on a Vit with the original exhaust before I bought mine about 6 years ago. Can't remember what it sounded like, but it's probably not a very big difference as long as you leave the db killer installend on the Akra. I never install frame sliders on my bikes, don't...
  14. nampus

    Kriega US-30 Drypack

    Have been using those Kriega bags for over 10 years, possibly 15, and two of the three were second hand. And they never let a drop of water in.
  15. nampus

    Kriega US-30 Drypack

    I use a Kriega US-20 and two US-10 on my 701, there's very few bikes you can't fit these bags to. I just put 2 loop straps under the pillion seat and hook the bags to those loops.
  16. nampus

    Dutch Vitpilen 701

    I've only had one Regina chain before, 20 years ago on a 50cc Aprilia, and that was absolute dogsh*t 😂 Needed adjusting about every 5km So I hope this is a lot better 😅
  17. nampus

    Dutch Vitpilen 701

    Changed the chain and sprockets today. Regina HPE endurance 'maintenance free' chain.
  18. nampus

    Dutch Vitpilen 701

    Dreft dish soap. Also known as fairy liquid.
  19. nampus

    Dutch Vitpilen 701

    Not impressed with the original DID VT2 chain this time. The original chain that was on the bike from new lasted 28.000km. The current VT2 has been on the bike for 10.000km and needed adjusting twice in the last 400km. Both times is was very very slack. It has even worn through the black...
  20. nampus

    Service costs

    Don't even bother with the service kit, all you need is the two oil filters and a few copper washers. The filters are 75038046100 and 58038005100, the screens can be cleaned, and the o-rings can be reused several times.
Back
Top Bottom