Search results

The control unit for the cc used 4 wires, 1 ground, and 3 signal wires, one for each button. Pressing any button, would connect the wire of that button to ground. For the Yamaha switchgear, the toggle switch had 3 wires (1 ground, 2 signal), and the flasher trigger had 2 wires(1 ground, 1...

Yes, the flash trigger is now the cc cancel.

Took the Husky for a testride today, everything works as intended, very happy!

Some more work on the Vitpilen done. Ever since I first took one out for a test ride I thought the left hand switch gear looked cheap. With the added cruise control button cluster the left bar was getting pretty full. The reach to the cruise control buttons was longer than I liked, and...

Rebuilt shock now back in the bike

Have you weighed the dual material sprocket and a regular steel sprocket? I had one on my KTM years ago, and the steek sprocket was lighter 🤣 As far as dampened sprockets go, I've only had an undampened front sprocket on my KTM for a very short period. I noticed a lot more vibration in my...

Since the shock is getting some love I thought it was only fair to give the forks some attention as well. The little springs on the outside of the dust caps were starting to corrode a bit. So some supplies were purchased: Took the forks out, opened up the topcap and was then reminded I never...

Rear shock needs a service, bike started wallowing a bit when coming out of corners with the throttle wide open. Wanted to increase rebound damping, but the adjuster has sort of seized. It will only go back and forth one click. So took the shock out this morning: Love the skylift! Cleaned...

Can you tell more about this? Is just software that gives full throttle from a certain percentage of throttle grip opening, or is it a completely different throttle grip, with a shorter stroke?

I've had a shorai in one of my previous bikes. No issues. I have a Shido in my Vitpilen 701 for a couple of years now, and no issues with that either.

Nice of you, I already have a set, but I can definitely recommend these to anyone who doesn't have them yet! No more sloppy throttle 👌🏻

I've sat on one, and I disagree. I thought it was lovely, I would definitely get one over a 401.

That's a beautiful bike!

Last ride of this season for me today, gave it a quick bath before I got home because it was very dirty from all the mud and wet leaves that are on the road now. I'll give it a proper wash soon. 5427km on the Husky this year and 7326km on the Triumph. Not a bad season considering it didnt...

Last ride of this season for me today

I rebuilt my clutch master once, and decided then, that if it needed another rebuild I would just upgrade to an aftermarket clutch master. The stock magura stuff is crap if you ask me.

Magura blood is mineral oil as far as I know, if your system is suitable for dot 4, you should not need magura blood. What year is your 701? Is that 3rd master cylinder a stock master cylinder? If it is, it should use dot 4/5.1 not mineral oil.

The increase and decrease function is pretty smooth 👌🏻

The unit was built for the Svartpilen 701, and me and the seller thought that it would work without issues on the Vitpilen. We were wrong 😅 The Svartpilen has a lot more room behind the headlight, and the connector for the throttle grip that the unit plugs into is behind the headlight on the...

It was a bit less plug and play than I expected, but we got there in the end. I now have working cruise control on my Vitpilen 😎