Search results

Healtech quickshifter iqse

There is a new standard for this connector used on later bikes. It has a red connector.

I was pretty sure it wouldn't but nice for someone else to check as well. You have got yourself probably the best OBD reader there, works flawlessly and will be useful for years. Already fixed a few mates cars with it just by clearing codes and resetting ECU. If you are using torque have a go...

Just noticed it only says to 2017 but I think the site hast been updated. I will check the pinout on mine.

This looks like a US supplier. Its a simple connector which is used by other bikes. https://www.obdinnovations.com/6-pin-to-obd2-adapter-cable-for-ktm-duke-rc-motorcycles-with-us-bosch-connector-can-bus/ I keep the whole lot in a sealable bag with some silica gel under the seat. It just fits if...

I have DimSport Rapid Bike Easy. It manipulates the lambda/O2 signal the ECU receives to allow you to run rich in closed loop. This stopped jerkiness at low speed. For open loop you cannot do it this way as the narrowband O2 doesn't work that fast so it is ignored.

I have done it with a cheap vgate BT OBDII and Torque Pro app. Later with an OBDlink MX+ and their app. Obviously the much more expensive OBDlink one does more and works faster but for basic monitoring the cheap vgate was fine. You will need a KTM 6pin cable you can get from lonelec .co .uk or...

Would you plan to get rid of the rear wheel hugger where the number plate mounts? If you swap it for a tail tidy you will end up with water and dirt being thrown forward from the wheel at slow speed going all over the back of you. Loads of bikes have that design now and it makes a brilliant...

Just to be clear. If you intend to fit this; https//www.unitgarage.com/husqvarna/401 to a 2020 model. You will need to take into account the indicators because it takes the place of the plastic mounting brackets. You may be able to use spacers and long bolts to use both at the same time but it...

I think you will be good because I fitted the indicator mounts from the 2020 model on my 2018. Husqvarna were incredibly unhelpful to the point of being rude and refused to acknowledge any details, which was odd due to my previous experience of them. It was obvious to me that from a...

I normally have that Delkevic on but I have taken the exhaust off several times and there are no issue with it. I'm not even sure where it could leak from unless the gasket disintegrated. I must just be careful. I can see now from the technical drawings at the links I posted that the clamp is...

I just googled and that pic stood out as being clearest. Too lazy to go to the garage and take a pic of mine when the Delkevic site had one the same. They changed part numbers from 2019 to 2020 but they also moved assembly to India from Austria. The parts may be the same but from different...

Delkevic have specific connecting pipes for these bikes so that any of their slip on silencers can work. I know the 2020 model exhaust is routed differently but the silencer part might be exactly the same...

I bought the puig dark smoke, I actually think the dark looks better now. Puig is a much bigger screen as well.