Search results

Look here.

I think I know what @Freccianera and @Albator are referring to. I wouldn't describe it as an additional noise. What I experience is that, for some reason I don't know, the third gear has a different pitch than the other gears. I especially notice it when riding with earplugs. As far as I can...

That is the part number I used when I bought it for myself. It's that same part you marked in the picture.

I have an extra set (in the pictures above) if anyone is interested. Just pay for shipping.

Husqvarna Chain Tension Adjuster Right. Ref: 21010984000

Final version. This one is closer to the tank's cover look when the light isn't mounted.

Double-sided VHB tape has been working fine, even over the vinyl wrap. I still need to test how it will fare on the hottest days, but it's been good so far.

I am no expert here but, I would imagine that if a change in wheel diameter affects the TC it will do so at all times, not only at deceleration within a specific engine RPM range. I could be wrong though.

Testing light placement and bean pattern.

It fits with the flat track number. It's *tight but it does fit. Make sure you hide the passenger handle strap under the rigid cover. Edited for spelling

That is not a seat. It's a plastic cover that is not meant to have any weight put on it. The Vitpilen's seat looks like the one in the picture. To answer your question, yes, the cover you posted fits the Svartpilen with the rear number/fairing on, but it is really tight. If you take off the...

Not a fix, but try this. Cycle through the gears with the bike off. Go all the way up to 6th, and then to first. Turn the key to ACC power and find neutral. The green light should turn on even if the gear Number/letter doesn't show on the dash. At this point, you should be able to turn the bike...

The ones in the first post are a bit of an in between. They have a focused bean in both white and yellow

Do you have a link to the stuff you used.

Good idea, thanks for the suggestion. I came up with this.

There's some space, but it's not much, maybe for a flathead bolt or something low-profile. I remember a few discussions about the tanks on these bikes getting a bit deformed and impeding the covers to fit properly. I do not want any metal rubbing against the plastic tank. I'll go with the...

There are some attachment points for the cable inside the housing. I'm still debating whether to run the cable towards the front or straight down. My main intention was to use bolts and nuts to fix it to the tank cover and drill a hole for the wire, but I don't think there is enough space...

What's the best way to attach these mounts to the tank? Would VHB double-sided tape do the job reliably?

If Husqvarna released the tank lights as accessories for the standard 801s. What would be an "acceptable" way to attach them to the bike? Bolts through the side panels, VHB double sided tape?

Yes, they are not expensive, but I'm still not sure I want to pay full price for the part just to "find out". I might not even like it after all is figured out. My current setup has all the controls I want on the same controller. The only things missing are the light bar switch and another...